Industrial Hydro Jetting in Kilgore and across East Texas
Heavy-duty jetting for industrial process and drainage lines.
What brings people to this page
Industrial drain and process lines have buildup that ordinary cleaning will not touch.
How we handle it
Industrial lines accumulate material that mechanical cleaning cannot remove. High pressure jetting scours the pipe wall back toward clean, restoring capacity. We camera first to verify line condition and after to document the result.
Signs you need industrial hydro jetting
- Reduced flow in industrial drain lines
- Heavy scale or process buildup
- Recurring backups despite mechanical cleaning
- Capacity loss during peak production
- Odor from drainage systems
If any of that sounds like what you are dealing with, get in touch and we will take a look. You can also call (903) 570-3051 any hour of the day.
What actually happens when you call us out
1. We look before we quote
We start by figuring out whether this is a one time blockage or the symptom of something structural. Clearing a line without asking why it clogged is how you end up calling a plumber every few months.
2. You get a real number
You hear the price before we start, including whether a camera inspection is worth adding. We will tell you when it is unnecessary rather than tacking it onto every job.
3. We do the work
We clear the line mechanically or with jetting depending on what is in it, working from the right access point so we are not pushing the problem further down the system.
4. We check it and clean up
After the line is open we confirm proper flow and, where it matters, show you what is going on inside the pipe so you can decide about longer term repairs with real information.
What changes the price on industrial hydro jetting
Industrial industrial hydro jetting is priced around the facility and the consequences of downtime more than around the raw labor hours. What matters:
- Whether the work can wait for a scheduled shutdown or has to happen live.
- Materials and their compatibility with what runs through the system.
- Access, height, and confined space considerations on the site.
- How critical the system is and whether redundancy is needed.
- Coordination with your maintenance team and any site safety requirements.
We will not list a price on this page, because anybody who quotes industrial hydro jetting sight unseen is either guessing or planning to change the number later. What we will promise is that you hear the real figure before we start, and if something unexpected turns up mid job we stop and talk to you rather than adding it to the invoice quietly.
Why it is worth doing properly
A line that clogs repeatedly is telling you something, and treating it as a recurring inconvenience rather than a symptom is how a cleanable problem becomes a sewer replacement. Clearing it properly and finding out why it happened is what keeps this from becoming an annual expense.
What you get from a small shop instead of a big one
Odyssey is deliberately small. That is not a limitation we are apologizing for, it is the entire point. When you call about industrial hydro jetting, you are talking to the people who will actually be at your property, not a dispatcher reading from a script and not a rotating roster of subcontractors who have never seen your building before.
It also means we cannot afford a bad job. A large outfit can absorb a handful of unhappy customers a month and keep running on advertising spend. We cannot, and we do not want to. Nearly everything we do comes from somebody who used us before or from a neighbor who told them to call. That is a much harder standard to meet than a marketing budget, and it is the reason we would rather talk you out of unnecessary work than sell it to you. You can see photographs of real jobs we have finished rather than stock images of somebody else’s pipe.
Why people keep our number
Honest diagnosis
We tell you what is actually wrong, including when it is smaller than you feared and the invoice is smaller with it.
A real price first
You hear the number before we start. If we open a wall and find something neither of us expected, we stop and talk to you.
Work that holds
Licensed Master Plumber work, done to code, cleaned up after. If something we installed fails in warranty, we come back.
A veteran-owned shop out of Kilgore
Stephen Crutchfield started Odyssey Plumbing Co in 2022 because he had watched other plumbers in East Texas treat customers badly: work sold that was not needed, prices that changed between the front door and the invoice, jobs left half cleaned up. He built this company to be the opposite of that.
Stephen is a licensed Master Plumber and holds a Water Protection Specialist certification, and he is the one who answers the phone when you call. We are veteran-owned, we are local, and our name is on every job we finish. Read more about how we got started or look at photos of actual work.
Other things we handle
Industrial Plumbing
Plumbing systems for plants, shops, and industrial facilities in East Texas.
Industrial Water Systems
Process and utility water systems installed, repaired, and maintained.
Industrial Drainage Systems
Trench drains, process drainage, and high-volume industrial drain systems.
Pump Installation
Sump, sewage, booster, and process pumps installed and commissioned.
Pump Replacement
Failed pump replacement with correct sizing and minimal downtime.
Emergency Industrial Plumbing
Around-the-clock response when an industrial plumbing failure stops production.
Questions about industrial hydro jetting
How is industrial jetting different?
Higher pressures and volumes, and different nozzle selection depending on what is coating the line.
Is it safe on our lines?
We camera first to verify condition. Jetting a compromised industrial line is not something we do blind.
Can you work during a shutdown?
Yes, and that is often the ideal window.
Do you document results?
Yes, with before and after camera footage on request.
How often should industrial lines be jetted?
It depends entirely on the process. We can help set a sensible interval based on what we find.
Prefer to talk it through?
Call and talk to Stephen directly. He is a Master Plumber, not a call center, so you get a straight answer from the person who will do the work.
Call (903) 570-3051Prefer to write first?
Tell us what is going on and we will chart the job before we ever show up, so you know roughly what to expect.
Odyssey Plumbing Co is regulated by the Texas State Board of Plumbing Examiners (TSBPE), 7915 Cameron Rd., Austin, TX 78754, (512) 936-5200, tsbpe.texas.gov. Stephen Crutchfield, Responsible Master Plumber License M-45845.